Pin progress update!
3 days ago – Sat, Jul 25, 2026 at 12:05:39 PM

• Hyena and Piebald Hyena - Production complete!
• Zebra haunch magnet - Production complete!

• Gator - Production complete!
• Albino Gator - Production completed, but the yellow needs checked in person since it looks too dark in the photos but they've insisted that it matches the pantones I provided. If it is incorrect it will be redone, but unsure if this will be by screen printing the current batch or remaking it.
• Fish magnet - Production complete!

• Possum - Production complete!
• Banana magnet - Production complete!

• Tiger and White Tiger - Production was completed, but all of the pins had an error. A cut out was instead given a white fill on both colorways. They have gone back in to manufacturing to fix this.
• Steak magnet - Production complete!

• Bear and Golden Bear - Production complete! 
• Salmon magnet - Production complete!

• Fox and Blonde Fox - Production was completed, but all of the pins had an error. A cut out was instead given a white fill on both colorways. They have gone back in to manufacturing to fix this. 
• Rodent magnet - Production complete!

• Neon and Golden Raptor - Production complete! 
• Neon dino haunch - Production complete! 

• Raccoon and Cinnamon Raccoon - In production
• Fish Bone magnet - Production complete!

• Lion - Production complete! 
• Zebra 2-Bone Meat Magnet - In production

• Neon Spinosaur and Halloween Spinosaur - Production complete! 
• Neon 2-Bone Meat Magnet - In production

• Coyote - Production complete! 
• Scrap Carcass magnet - Production complete! 

• Ferret and Lilac Ferret - Production complete! 
• Egg magnet - In production

• Bearded Vulture and Dustless Bearded Vulture - Production complete! 
• Bone magnet - Production complete!

• Grey Werewolf - Production complete!
• Black Werewolf - Production was completed, but for some reason the eyes were all done in black. They are being sent back for white screen printing to correct this issue.
• 2-Bone Grilled Meat magnet - In production

• Shark - Production complete! 
• Tuna magnet - In production

• Blue and Red Dragons - Production complete! 
• Grilled Haunch magnet - Production was completed, but the incorrect pantone was used for part of the meat. This is being sent back to correct.

• White, Black, and Brown Chickens - Production complete! 
• Mealworm magnet - In production

• Orca - Production complete! 
• Whole Salmon magnet - In production

• Gryphon - Production complete! 
• Ungulate leg magnet - In production

• Emerald Tree Boa - In production
• Bird magnet - Production complete! 

• Domestic Dog - Production complete! 
• Tennis Ball magnet - In production

• Maned Wolf - In production  
• Wolf Apple magnet - In production

• Kobold - In production  
• Cooked chicken leg magnet - In production 

• Cheetah - Production completed, but the photo sent for approval has some odd errors to the infill that do not match the proofs. I'm in the process of confirming if that was just the single pin or if this is an error affecting the whole batch. If it is the whole batch I will be fighting for a remake.
• Gazelle leg magnet - Production complete!

• Lynx - Production complete! 
• Rabbit magnet - In production

• Fennec Fox - Production complete! 
• Lizard magnet - In production

• Domestic Cat pin and Toy Mouse magnet - I did a whoopsie on this set and forgot to submit the sheet for this one, so it is getting started a bit late compared to the others. I'm still waiting for completed proofs.

• African Wild Dog - Production complete! 
• Raw Meat magnet - In production

• Secretary Bird - In production 
• Snake magnet - In production

• Neon Potion Dragon and CMYK Potion Dragon - Production complete!
• Potion magnet - In production

• Black and White Cannibal Unicorn - In production 
• Unicorn Meat magnet - In production 

OVERALL PROGRESS COUNTS:

• 33 Completed Animal Pins
• 11 Completed Mini Meat Magnets
• 10 Animals in production
• 17 Magnets in production
• 5 Animals being re-manufactured or getting additional screen printing
• 1 Magnet being re-manufactured
• 1 Set still in proof stage due to an error

• Hyena
• Piebald Hyena
• Gator
• Albino Gator
• Possum
• Bear
• Golden Bear
• Neon Raptor
• Golden Raptor
• Coyote
• Bearded Vulture
• Dustless Bearded Vulture
• Cheetah*

• Regular stickers and banner stickers have arrived! They look beautiful and are already graded.
• All other non-pin rewards are in hand and waiting to go!
• USPS has upped their prices for packages under a pound, so if you've been holding on to money for shipping charges keep in mind it is likely to be a bit higher than previous shipments from me.

That's all for now! See you when I have more to share!

Ongoing Progress for Gnawesome Predators!
2 months ago – Sun, May 17, 2026 at 11:20:51 PM

Hey all! Just checking in to let you know that stuff is getting chipped away at. There's lots of little things happening and I don't have many details to share on each individual one but they still make a heck of a pile, so:

• All regular pins and many recolors are available for pre-order on Lairbrew.com! If you are looking for an alt. color pin that isn't up, I ordered few enough of those that I will need to grade the shipment before I can put any additional ones up for sale.
• Gold line gator and chicken stickers have arrived! I will try to remember to snap photos before the next update, but they turned out really nice. 
• All other stickers are currently in manufacturing. I have not heard back on them in a moment and plan to check in with them soon.
• Many pins have not begun manufacturing. They are still in the proof review stage. I have been continually told I will have them before July, but I am very much doubting that at this stage.
• Currently 25 pins have been readied for production out of the over 40 designs. More than halfway there, but not as far along as I would have preferred to have going by now.

Pin Samples

Last time I shared some unfinished pins that didn't have screen printing or anything like that done. Here's some more, now with screen printing in some cases! Also a little reminder that many of these pin sets are B I G . That's why each set was as high a cost as it was. The raptor is among the largest because of the pose, since pins are sized specifically to look proportional to one another's snacks. For the most part the started at 2.5in and they were sized up or down (usually up) to make sure the faces were the correct size for the meats.

Not everything turned out perfect. Here are a couple problem pins. For the unicorn, they moved forward with some incorrect layers on and didn't run a proof by me so it has a lot that is getting changed- for example it having 2 different tail ends. The eyes will also be recessed metal like the ear and hooves, not bright orange. For the CMYK potion dragon, screenprinting light yellow on black enamel didn't go down so hot. It is being changed to black screenprinting on yellow enamel instead! 

Here's the error cannibal unicorn with a 2-bone meat attached. The meat is upside down, but part of the fun is you'll be able to attach it however you'd like!



That's all I really have to say for now! You wanna see some cute lil dudes I'm working on? Some of them might seem familiar!


I want to make some affordable, adorable little plush that are nice enough to display but fun feeling enough to mess with. They're 4 and a half inches tall, have glass beads filling their dumpy lil bods, and they should have a pretty low price point, though what that will be will depend on transport prices by the time I finally get to make them.  I know a lot of you here will appreciate the gnawesome predator cameos! They're done in the same style as the Bantam Burials I'm working on for Deadweights.

Anyway! I'm focusing on Big Brew Bash fulfillment right now, but whenever I get significant news I'll still come over here to share it. I'll see you then!

Manufacturing! Pin sampling pics, future availability
4 months ago – Mon, Apr 06, 2026 at 10:36:11 AM

Manufacturing has been in pre-production for a little bit now! Things have been progressing smoothly enough that I haven't had a lot to share. I did want to apologize though- I found an update in the drafts that I thought I'd posted a month ago but it apparently did not actually go up! I had no idea I'd left you all in the dark by accident for so long. I promise not much was missed! Just the pre-order shop getting shuttered and pins getting ordered.

Here's some pantone/enamel tests with a few pins! These have no screen printing, grinding, or electroplating. Poor Guz looks so naked... These are popular pins with difficult to match colors, so making samples of them is important, but most won't be tested in this way.

Carrion Baggage: Second Bite is ABOUT TO END!! Tuesday is the final day and several designs are unlocked, so please consider taking a peak if this sort of thing interests you!

The pre-order shop for Gnawesome Predators is now closed, but here's the final art for the pins unlocked when it was open: 

I am in the process of putting pre-orders up on my site. That includes for all the pins unlocked after the campaign! Check the site in the future if you don't already see the design you're after up, I'm having to upload them in small batches. All the base pins and limited numbers of the recolors will be available through our website, and they will go to select conventions with us! The recolors are getting very few made except for the most popular variants (albino gator, black werewolf,) but I will hopefully have enough of the others for a good long time.

See you when I next have something to share!

Pre-Order store is closing. Orders charging soon!
4 months ago – Mon, Mar 16, 2026 at 05:14:12 PM

Hey all! Surveys have been locked for a little bit, and cards will be charged soon. If you're not completely sure of your card info now is a good time to check it to make sure things go through successfully. I plan to close the pre-order store soon to make sure I can lock numbers in and get production going on the freshly unlocked designs. If possible I'd like them all to wrap up manufacturing at around the same time so no one's fulfillment is delayed! If you were planning to place a separate order there time is officially dwindling.

We're entering the quiet period where we're just waiting for manufacturing to wrap up, so expect things to be quiet around here for awhile. It's time for me to be concentrating on Big Brew Bash fulfillment which is a very labor-intensive process since everything is being hand stuffed/sewn and I have hundreds to do. I've also got my currently running campaign to be keeping an eye on!

Carrion Baggage: Second Bite is live and FUNDED with multiple stretch goals unlocked!

The salmon, tuna, trash can, and sardine tin bags are all unlocked, with 4 new plush keychains confirmed! We're on our way to the cracked egg bag goal right now.

I hope you're all doing well and your March is going well so far!

New/updated animal sketches! Lower unlocks!
5 months ago – Mon, Feb 23, 2026 at 04:51:29 AM

Just a quick one today! The add-on pins that are up for unlock in the surveys/pre-order store all have sketches now! Those that had the super rough sketches before now have more refined ones, and the completely blank ones have equally refined sketches for the most part- all except the cockatrice, since I left that one for last and my arm is kinda dying at the moment haha. So I will probably have to do a LOT of touching up to it. But overall I'm happy with these.

Enough add-ons have been gotten via survey that I was able to adjust down the minimum order number for many of these designs! A lot of them range from nearly halfway there to over halfway there, so consider giving them a look. I think my favorite might be the african wild dog. I hadn't drawn one since high school and had fully forgotten how blocky they are other than their big ol radar dish ears. 

I hope you will all have a great week!